Cress Kilns

Cress Series "E" Kilns Provides 5 preset easy-to-use firing speeds, or program your own. Cress electronic control also includes a short soak at the end of each firing cycle to ensure greater temperature uniformity with uneven loads. All “E” series kilns now have 3-zone capable controls, but are initially connected up for one zone. Multizone temperature controls may be ordered at no additional cost at the time order is placed. The optional Cress Clean Air venting systems attaches to the bottom of the control box, draws fumes horizontally inside then down and out between the control panel, automatically comes on when the kiln starts, and turns off when the kiln stops. After slow cooling to 1000 degrees F. the fan restarts to cool faster and again turns off at 140 F.

All 10 & 12 sided kilns come standard with an easy to open "Lid Assist". Steel bottom safety plate. Lifting handles. Three year warranty.

All kilns come standard single phase but may be wired for 3 phase
IMPORTANT NOTE TO SCHOOLS AND INSTITUTIONS

- Many of you have 208 volt wiring, be very sure of your voltage when ordering a kiln. Price is not effected. Please consult local code, for breaker size needed.

For information on Houston area Cress kiln repair, give us a call: 713-864-6442